Новый дистрибьютор Booster Oil в Бахрейнe
Bahrain
Booster Lithium Complex EP 2 BLU is a lithium complex thickened lubricating grease based on mineral oil. The grease contains antioxidants, corrosion inhibitors and EP/AW additives.
Booster Lithium Complex EP 2 BLU is a modern high performance product setting a new standard for a truly universal grease suitable for both industrial and automotive applications. The product’s all round properties make it the primary choice for various types of bearing applications including heavy load conditions and temperature peaks up to 220°C. The lithium complex soap makes the product suitable for applications within a very wide temperature range and especially applications at elevated temperatures. The complex soap structure also gives the product a high degree of mechanical stability. This enhances the performance in vibrating housings and prolongs re-lubrications intervals. Booster Lithium Complex EP 2 BLU meets Volvo standard “Lubricating grease 97720”.
— Excellent at high temperatures
— Very good mechanical stability
— High load carrying capacity
— Good corrosion protection
| DIN 51502 | KP2N-30 | |||||
| ISO 6743 | ISO-L-XCDIB2 |
| Thickener | Lithium Complex | |||||
| Base oil | Mineral oil | |||||
| Colour | Visual | Blue | ||||
| NLGI Grade | ASTM D217 | 2 | ||||
| Dropping point | IP 396 | >260°C | ||||
| Base oil viscosity at 40°C | ISO 12058 | 210 mm2/s | ||||
| Base oil viscosity at 100°C | ISO 12058 | 18 mm2/s | ||||
| 4-ball weld load | DIN 51350:4 | 2800 N | ||||
| Temperature range | -30°C to +140°C Max +220°C | |||||
| Penetration 60 strokes | ISO 2137 | 265-295 | ||||
| Penetration 100.000 strokes | ISO 2137 | +30 | ||||
| Shell roll stability 50h/80°C | ASTM D1831mod | +70 | ||||
| SKF V2F (500 and 1.000 rpm) | SKF | Pass | ||||
| SKF Emcor WWO distilled water | ISO 11007 mod | 0-1 | ||||
| SKF Emcor WWO salt water | ISO 11007 mod | 2-3 | ||||
| SKF Emcor acid solution | ISO 11007 | 0-0 | ||||
| Copper corrosion 24h/100°C | ASTM D4048 | 1a | ||||
| Water resistance | DIN 51807/1 | 1-90 | ||||
| Water washout 1h/80°C | ISO11009 | 4% | ||||
| Separation 168h at 40°C | IP 121 | 2% | ||||
| SKF R2F test A | SKF | Pass | ||||
| SKF R2F test B at 140°C | SKF | Pass | ||||
| 4-ball wear scar (1h at 400N) | DIN 51350:5 | 0,7 mm | ||||
| Timken 55 lbs | IP 326 | OK | ||||
| Oxidation stability 100 h/100°C | ASTM D942 | 14 kPa | ||||
| Flow pressure -35°C | DIN 51805 | <1400 hPa | ||||
| Approx. density at 20°C | IPPM-CS/03 | 0,95 |
The information above is based on current production data and can vary within given tolerances. Temperature range is given as a guideline only. Information and data can be changed without previous notification. This information replaces prior editions.
Booster
Новости и Мероприятия
