Lithium Complex EP 2 BLU

Serienummer: 2909

Booster Lithium Complex EP 2 BLU is a lithium complex thickened lubricating grease based on mineral oil. The grease contains antioxidants, corrosion inhibitors and EP/AW additives.


Booster Lithium Complex EP 2 BLU is a modern high performance product setting a new standard for a truly universal grease suitable for both industrial and automotive applications. The product’s all round properties make it the primary choice for various types of bearing applications including heavy load conditions and temperature peaks up to 220°C. The lithium complex soap makes the product suitable for applications within a very wide temperature range and especially applications at elevated temperatures. The complex soap structure also gives the product a high degree of mechanical stability. This enhances the performance in vibrating housings and prolongs re-lubrications intervals. Booster Lithium Complex EP 2 BLU meets Volvo standard “Lubricating grease 97720”.

– Excellent at high temperatures
– Very good mechanical stability
– High load carrying capacity
– Good corrosion protection


DIN 51502 KP2N-30

Typical Technical Data

Thickener Lithium Complex
Base oil Mineral oil
Colour Visual Blue
NLGI Grade ASTM D217 2
Dropping point IP 396 >260°C
Base oil viscosity at 40°C ISO 12058 210 mm2/s
Base oil viscosity at 100°C ISO 12058 18 mm2/s
4-ball weld load DIN 51350:4 2800 N
Temperature range -30°C to +140°C Max +220°C
Penetration 60 strokes ISO 2137 265-295
Penetration 100.000 strokes ISO 2137 +30
Shell roll stability 50h/80°C ASTM D1831mod +70
SKF V2F (500 and 1.000 rpm) SKF Pass
SKF Emcor WWO distilled water ISO 11007 mod 0-1
SKF Emcor WWO salt water ISO 11007 mod 2-3
SKF Emcor acid solution ISO 11007 0-0
Copper corrosion 24h/100°C ASTM D4048 1a
Water resistance DIN 51807/1 1-90
Water washout 1h/80°C ISO11009 4%
Separation 168h at 40°C IP 121 2%
SKF R2F test A SKF Pass
SKF R2F test B at 140°C SKF Pass
4-ball wear scar (1h at 400N) DIN 51350:5 0,7 mm
Timken 55 lbs IP 326 OK
Oxidation stability 100 h/100°C ASTM D942 14 kPa
Flow pressure -35°C DIN 51805 <1400 hPa
Approx. density at 20°C IPPM-CS/03 0,95

The information above is based on current production data and can vary within given tolerances. Temperature range is given as a guideline only. Information and data can be changed without previous notification. This information replaces prior editions.


June 2019

Booster Oil team at the Voodoo Race 2019 in Korea, 1st, 2nd and 3rd round

South Korea

New distributor in Bahrain

June 2019

Booster Oil racing team took 1st place at Nexen Tire Speed Racing 2019

South Korea
1,2,3 of March 2019

Booster Oil Guatemala motorcycle race at Expo Moritz 2019!


Taiwan service car shops

Customers choose for Booster Oil premium quality! Few […]

NEW Product: Booster Jetski

Booster Oil developed a special product: Booster Jetski. […]

Official approval form VOLVO, Renault, Mack Trucks

Booster Oil has an official approval from VOLVO, […]

30 service garages and shops in Ulaanbaatar, Mongolia

30 service garages and shops in Ulaanbaatar, Mongolia […]

Booster Oil in Babylon, Irak

Booster’s 2nd Lubricant Shop and Oil Change Station […]

Speed Racing Event 2017

Yearly Speed Racing 2017 where Booster Oil participates as […]