The Booster Cutting Oil HFE is a cutting oil based on hydro treated mineral base oils.
|Density at 15 ⁰C, kg/l||0,884|
|Viscosity 40 ⁰C, mm²/s||22,15|
|Viscosity 100 °C, mm²/s||4,37|
|Flash Point COC, °C||182|
|Pour Point, °C||-15|
|Acid Number, mgKOH/g||0,77|
The Booster Cutting Oil HFE is a heavy duty cutting oil has to be used undiluted for machining of high alloyed, stainless, austenitic, acid and heat resistant steels. This oil shows excellent results by working with difficult operations like deep-hole drilling, tapping, shaping or shaving of gears. A cutting oil based on hydro treated mineral base oils. Under addition of special mist reducing and anti-wear additives the following properties are obtained:
– high load carrying properties
– minimal tool wear
– reduced mist load in the air
– well toleration by the skin
There is a risk of staining of non-ferro metals.
By product choice always follow the requirements and instructions of the manufacturer.