The Booster Cutting Fluid HSU is a high quality emulsifying, semi-synthetic cutting fluid can be used for several universal applications in metalworking.
|Density at 15 ⁰C, kg/l||0,970|
|Viscosity 20 ⁰C, mm²/s||250,00|
|Refraction Index 20 °C||1,466|
This high quality emulsifying, semi-synthetic cutting fluid can be used for several universal applications in metalworking like machining or grinding of ferro- and non-ferro metals, especially aluminium and has a wide application area. This product provides excellent tool operating times. This cooling fluid is also applicable in combination with relative hard water. When mixed with water in the right ratio the following properties are obtained:
– a very stable and odorless emulsion
– a good corrosion protection from both piece and machine
– excellent surface finish
– free of chlorine, secondary amines, phenols and nitrite
Emulsions are to be stored inside in closed packing’s at above 0 °C. This liquid can be kept fresh for a maximum of 9 months.
Mixing is achieved by slowly pouring the fluid into water, preferably of drinking water quality, while stirring thoroughly or using an automatic mixing device. In this way optimal operation of the emulsion is achieved. Depending of the water hardness and the applied machining process the below mentioned mixing ratio are advised:
– General machining 1 part liquid in 19
– 24 parts water
– Heavy machining 1 part liquid in 12
– 19 parts water
– Grinding 1 part liquid in 24 – 32 parts water
By product choice always follow the requirements and instructions of the manufacturer.