The Booster Compressol SE 100 is a synthetic ISO VG 100 high performance ester-based compressor lubricant that utilizes latest available additive technology providing outstanding resistance to oxidation and thermal degradation required in air compressors and pumps.
| Appearance | Clear, yellow liquid | |||||
| Density at 15 ⁰C, kg/l | ASTM D-445 | 0,957 | ||||
| Viscosity 40 ⁰C, mm²/s | ASTM D-445 | 99,60 | ||||
| Viscosity 100 ⁰C, mm²/s | ASTM D-445 | 9,1 | ||||
| Viscosity Index | ASTM D-2270 | 73 | ||||
| Flash Point COC, ⁰C | ASTM D-92 | >264 | ||||
| Pour Point, ⁰C | ASTM D-97 | -31 | ||||
| Total Acid Number, mgKOH/g | ASTM D-664 | 0,09 | ||||
| Steel Corrosion | ASTM D-665-B | Pass | ||||
| Demulsibility 80 ⁰C | ASTM D-1401 | 6 |
Compressol SE 100 is formulated to meet or exceed common OEM requirements and can also be used in combination with inert / nonreactive process gases and fumes. This compressor oil is recommended for use in systems, such as piston compressors, rotary vane compressors operating under moderate temperature and load conditions and vacuum pumps with ultimate pressures of approximately 10-3 mbar at 100 °C. This product has advantages over mineral oils and other synthetic lubricants and is characterized by:
– Excellent oxidation stability
– Very good thermal resistance
– Good water separation and air release
– Good metal wetting properties
– Extended drain intervals
– No deposit/lacquer formation
– Reduced power consumption
Meets or exceeds the requirements of:
DIN 51506 VB/VC/VDL
ISO-L-DAB / DVC (according to ISO/DIS 6743-3)
By product choice always follow the requirements and instructions of the manufacturer.
Available in 1, 4, 5, 20, 60, 208 & 1000 ltr Booster
Latest
news
and
events
