Lithium Complex EP 3 HDB

الرقم التسلسلي: 2919

Booster Lithium Complex EP 3 HDB is a lithium complex thickened lubricating grease based on mineral oil. The grease contains antioxidants, corrosion inhibitors and EP/AW additives.

Description

Booster Lithium Complex EP 3 HDB is a modern high performance product setting a new standard for a truly universal grease suitable for both industrial and automotive applications. The product’s all-round properties make it the primary choice for various types of bearing applications including heavy load conditions, vibrating applications and temperature peaks up to 220°C. The lithium complex soap makes the product suitable for applications within a very wide temperature range and especially applications at elevated temperatures. The complex soap structure also gives the product a high degree of mechanical stability. This enhances the performance in vibrating housings and prolongs re-lubrications intervals.

– Excellent at high temperatures
– Very good mechanical stability
– Good corrosion protection

Classifications

DIN 51502 KPHC2.5N-30
ISO 6743 ISO-L-XCDIB2.5

Typical Technical Data

Thickener Lithium Complex
Base oil Mineral oil
Colour Visual Yellowish brown
NLGI Grade ASTM D217 2.5
Dropping point IP 396 >260°C
Base oil viscosity at 40°C ISO 12058 215 mm2/s
Base oil viscosity at 100°C ISO 12058 18 mm2/s
4-ball weld load DIN 51350:4 2800 N
Temperature range -30°C to +150°C Max +220°C
Penetration 60 strokes ISO 2137 245-275
Penetration 100.000 strokes ISO 2137 +35
Shell roll stability 50h/80°C ASTM D1831 mod +70
SKF Emcor WWO distilled water ISO 11007 mod 0-0
SKF Emcor WWO salt water ISO 11007 mod 2-2
SKF Emcor WWO distilled water ISO 11007 mod 0-0
SKF Emcor WWO salt water ISO 11007 mod 2-3
Water resistance DIN 51807/1 1-90
Water washout 1h/80°C ISO11009 3%
Separation 168h at 40°C IP 121 2%
SKF R2F test A SKF Pass
SKF R2F test B at 150°C SKF Pass
4-ball wear scar (1h at 400N) DIN 51350:5 0,8 mm
Oxidation stability 100 h/100°C ASTM D942 22,0 kPa
Flow pressure -30°C DIN 51805 1400 hPa
Approx. density at 20°C IPPM-CS/03 0,91

The information above is based on current production data and can vary within given tolerances. Temperature range is given as a guideline only. Information and data can be changed without previous notification. This information replaces prior editions.

أخر الأخبار والأحداث

out new distributor in Bahrain

June 2019

Booster Oil team at the Voodoo Race 2019 in Korea, 1st, 2nd and 3rd round

South Korea
June 2019

Booster Oil racing team took 1st place at Nexen Tire Speed Racing 2019

South Korea

أغسطس 2017 خصصت بوستر أويل باص مرسيدس بينز لعميلها في المملكه العربيه السعوديه

خطوط تعبئه بوستر الأوتوماتيكيه

مهرجان سباق السيارات في منغوليا

مايو2017 بوستر أويل شريك رسمي في المشروع الوطني للتعدين (Mening National Operation)

عبوة بوستر الجديده