The Booster Sadrizol is an emulsifying metal working fluid based on high quality mineral base oils.
|Density at 15 ⁰C, kg/l||0,895|
|Viscosity 40 ⁰C, mm²/s||35,10|
|Flash Point COC, °C||110|
|Pour Point, °C||-21|
|Total Base Number, mgKOH/g||15,1|
This is an emulsifying metal working fluid based on high quality solvent refined base oils and a number of additives. The following properties are obtained after mixing the product with water:
– a good stability of the emulsion
– a good protection against corrosion
– low foaming characteristics
In general a 10% emulsion (add 1 part oil to 9 parts water while stirring thoroughly) to obtain a very stable emulsion, gives a good cooling lubricant for drilling, turning and cutting of normal commercial steels.
The product must be stored inside and above 0 °C; because of stability consume within one year.
Herbert Corrosiontest IP 125 (10%): 0/0-0
By product choice always follow the requirements and instructions of the manufacturer.
أخر الأخبار والأحداث