The Booster Cutting Oil MFE is a cutting oil based on hydro treated mineral base oils.
Density at 15 ⁰C, kg/l | 0,876 | |||||
Viscosity 40 ⁰C, mm²/s | 31,50 | |||||
Viscosity 100 °C, mm²/s | 5,36 | |||||
Viscosity Index | 103 | |||||
Flash Point COC, °C | 202 | |||||
Pour Point, °C | -13 | |||||
Acid Number, mgKOH/g | 0,34 |
This cutting oil is based on hydro treated mineral base oils. Under addition of special mist reducing and anti-wear additives the following properties are obtained:
– high load carrying properties
– minimal tool wear
– reduced mist load in the air
– well toleration by the skin
This cutting oil can be used undiluted for general machining of low carbon and light alloyed steels. This oil can also be used for grinding and cutting of wheels.
There is a risk of staining of non-ferro metals.
By product choice always follow the requirements and instructions of the manufacturer.
أخر الأخبار والأحداث