Cutting Fluid MU

الرقم التسلسلي: 2555

The Booster Cutting Fluid MU is a water extendable mineral oil containing cutting fluid, which is usable for universal applications in metalworking.

Typicals

Density at 15 °C, kg/l 0,929
Refraction index 20 °C 9,900
pH – 3% in water 9,3

Applications

This cutting oil is a water extendable mineral oil containing cutting fluid, which is usable for universal applications in metalworking. When mixed with water the following properties are obtained:
– a very stable and finely dispersed emulsion
– a good corrosion protection of both piece and machine
– excellent surface finish
– no aggression to the skin

This cutting oil is usable for metalworking of steels and non-ferro metals, specially aluminium, also with higher tensile strength.

N.B.: Mixing is achieved by slowly pouring the fluid into water, preferably of drinking water quality, while stirring thoroughly or using an automatic mixing device.

Storage: Emulsions are to be stored inside and above 0 °C. This liquid can be kept fresh for a maximum of 9 months.

Mixing suggestions: Cutting of steels and non-ferro metals, 1 part liquid on 9 parts water to 1 part liquid to 19 parts water. Cutting of high alloyed steels, 1 part liquid to 19 parts water.

By product choice always follow the requirements and instructions of the manufacturer.

أخر الأخبار والأحداث

out new distributor in Bahrain

June 2019

Booster Oil team at the Voodoo Race 2019 in Korea, 1st, 2nd and 3rd round

South Korea
June 2019

Booster Oil racing team took 1st place at Nexen Tire Speed Racing 2019

South Korea

أغسطس 2017 خصصت بوستر أويل باص مرسيدس بينز لعميلها في المملكه العربيه السعوديه

خطوط تعبئه بوستر الأوتوماتيكيه

مهرجان سباق السيارات في منغوليا

مايو2017 بوستر أويل شريك رسمي في المشروع الوطني للتعدين (Mening National Operation)

عبوة بوستر الجديده