The Booster Compressol SE 220 is a synthetic high performance ester-based compressor lubricant that utilizes latest available additive technology providing outstanding resistance to oxidation and thermal degradation required in air compressors and pumps.
|Appearance||Clear, yellow liquid|
|Density at 15 ⁰C, kg/l||ASTM D-445||0,947|
|Viscosity 40 ⁰C, mm²/s||ASTM D-445||212,5|
|Viscosity 100 ⁰C, mm²/s||ASTM D-445||16,1|
|Viscosity Index||ASTM D-2270||73|
|Flash Point COC, ⁰C||ASTM D-92||>264|
|Pour Point, ⁰C||ASTM D-97||-27|
|Total Acid Number, mgKOH/g||ASTM D-664||0,28|
|Steel Corrosion||ASTM D-665-B||Pass|
|Demulsibility 80 ⁰C||ASTM D-1401||13|
Booster Compressol SE 220 is formulated to meet or exceed common OEM requirements and can also be used in combination with inert / nonreactive process gases and fumes. This compressor oil is recommended for use in systems such as piston compressors. This product has advantages over mineral oils and other synthetic lubricants and is characterized by:
– Excellent oxidation stability
– Very good thermal resistance
– Good water separation and air release
– Good metal wetting properties
– Extended drain intervals
– No deposit/lacquer formation
– Reduced power consumption.
Booster Compressol SE 220 is based on chemistry with outstanding solvency properties providing deposit-free valve operation. This also means contact should be avoided with materials such as: natural rubber, low nitrile rubber (Buna N, NBR (<30% acrylonitrile), butyl rubber, polychloroprene (Neoprene), styrene-butadiene rubber (Buna S, SBR), ethylene-propylene terpolymer (EPDM), ethylene/acrylic rubber, PVC, polyethylene, single component paint. When switching from other lubricants or in presence of remaining residues, flushing is recommended.
Meets or exceeds the requirements of:
DIN 51506 VB/VC/VDL
ISO-L-DAB / DVC (according to ISO/DIS 6743-3)
By product choice always follow the requirements and instructions of the manufacturer.
أخر الأخبار والأحداث