The Booster Cutting Fluid MU is a water extendable mineral oil containing cutting fluid, which is usable for universal applications in metalworking.
|Density at 15 °C, kg/l||0,929|
|Refraction index 20 °C||9,900|
|pH – 3% in water||9,3|
This cutting oil is a water extendable mineral oil containing cutting fluid, which is usable for universal applications in metalworking. When mixed with water the following properties are obtained:
– a very stable and finely dispersed emulsion
– a good corrosion protection of both piece and machine
– excellent surface finish
– no aggression to the skin
This cutting oil is usable for metalworking of steels and non-ferro metals, specially aluminium, also with higher tensile strength.
N.B.: Mixing is achieved by slowly pouring the fluid into water, preferably of drinking water quality, while stirring thoroughly or using an automatic mixing device.
Storage: Emulsions are to be stored inside and above 0 °C. This liquid can be kept fresh for a maximum of 9 months.
Mixing suggestions: Cutting of steels and non-ferro metals, 1 part liquid on 9 parts water to 1 part liquid to 19 parts water. Cutting of high alloyed steels, 1 part liquid to 19 parts water.
By product choice always follow the requirements and instructions of the manufacturer.