The Booster Cutting Oil MP is a universal cutting oil based on hydro treated mineral base oils.
|Density at 15 ⁰C, kg/l||0,877|
|Viscosity 40 ⁰C, mm²/s||32,30|
|Viscosity 100 °C, mm²/s||5,61|
|Flash Point COC, °C||224|
|Pour Point, °C||-12|
|Acid Number, mgKOH/g||1,56|
A cutting oil based on hydro treated mineral base oils. Under addition of special mist reducing and anti-wear additives the following properties are obtained:
– high load carrying properties
– minimal tool wear
– reduced mist load in the air
– good de-aeration power
– low foaming characteristics
– not aggressive for the paints on machine tools – well toleration by the skin
This neat multipurpose cutting oil can be used undiluted for cutting and boring of alloyed steels with a high tensile strength, but also for non-ferro and light metals. This oil has characteristics as hydraulic oil and industrial gear oil.
أخر الأخبار والأحداث